New 2016 version front wheel hubs with 4 different offset positions on the top. The back inside hole was the basic hole on the T15 and earlier cars. The holes are 6-6 mm offset from each other. The different offset has effect to the rear traction and the steering characteristic of the car. The hubs are made of CNC machined 7075-T6 alloy. They have high quality, small and low friction bearings. The front steering arm has 4 ackerman positions which allows you to find the best steering characteristic that fits to your driving style.
New Front Wishbone
New 2016 version of front wishbones with center axis ball anti-roll bar. We moved the front anti-roll bar in the centerline of the wishbone to reduce dynamic droop change during suspension movement. If the anti-roll bar mounted on the top of the wishbone (like on the T15 and many other brands car), during suspension movements left and right side droops are changing and making the car not the same in left and right hand corners. When the anti-roll bar mounted in center line of the wishbone (center of rotation) then the left and right side droops stay equal. The wishbone made of 7075-T6 alloy and has zero play Steel/Brass hybrid ball joints.
We offer six different hardness of front anti roll bars to provide a wide range of setup possibilities.
30520 – 5mm short neck roll-bar set - 30530 – 5mm long neck roll-bar set 30540 – 5.5mm short neck roll-bar set - 30550 – 5.5mm long neck roll-bar set 30560 – 6mm short neck roll-bar set - 30570 – 6mm long neck roll-bar set
New Anti-Roll Bar Mountings
We have three different types of Anti-roll bar Mounting for our three different thickness Anti-roll bar.
30513 – Mounting for 5mm roll-bar (4pz) 30514 – Mounting for 5.5mm roll-bar (4pz) 30515 – Mounting for 6mm roll-bar (4pz)
19111 Upgrade Kit
The 19111 Center Roll-Bar Front Wishbone Upgrade kit Includes the following components:
30155 – Left front lower wishbone 30156 – Right front lower wishbone 30515 – Mounting for 6mm roll-bar (4pz) 30560 – 6mm short neck roll-bar